INSTRUNET HARDWARE
AND SOFTWARE PRODUCTS
PRODUCT LIST >
Each product is listed in the navigation bar to the left.
DATA ACQUISITION BOXES
Each box provides 16se/8di Analog Inputs, 8 Analog Outputs, and 8 Digital I/O lines, w/screw
Boxes are daisy chainable (i.e. one can attach to another in a chain) and requires one iNet-2xx
Card to attach them to a computer. Each box includes a 3meter instruNet cable (DB25M/DB25F).
| #iNet-100 |
instruNet External A/D Box with 3m cable |
|
| #iNet-100B |
Same as iNet-100, yet w/ add'l 16 BNC Connectors |
|
| #iNet-100HC |
Same as iNet-100, yet w/ 15mA/.01uF Vout's |
|
The "HC" is commended for strain gages, thermistors, RTD's, Load Cells, and Pots |
CONTROLLER CARDS
Each Controller card manages up to 16 iNet-100's and includes the instruNet manual and software (i.e.
strip chart/oscilloscope application , visual basic interface, C interface). The following cards are
compatible with Windows 95/98/Me/Nt/2k/Xp (except i230 on NT), and Macintosh PPC/G3/G4/> OS >= 8
(must boot OS 9 if on OS >= 10 Mac). For details, see www.instruNet.com#116. instruNet World PLUS
(iW+) software (described at URL www.instrunet.com/plus) is not compatible with Macintosh.
| #iNet-200 |
PCI-Bus Card for Windows & Macintosh, without iW+
Requires computer with 1 free PCI slot |
| #iNet-230 |
PCMCIA-Bus Card for Windows & Macintosh, without iW+
Requires computers with 1 free PCMCIA type II 16bit slot and requires external iNet-312.x supply |
| #iNet-200P |
Same as iNet-200, yet includes PLUS (iW+) software |
| #iNet-230P |
Same as iNet-230, yet includes PLUS (iW+) software |
ACCESSORIES
The following accessories provide cabling and power supply support to instruNet
modules.
| #iNet-300 |
Power Adaptor
Used to cable in an external power supply, no signal isolation, requires iNet-3xx Power Supply |
| #iNet-330 |
Optical Isolator
Same as iNet-300, yet isolates (1KV) power & signal lines |
| #iNet-312.8 |
Power Supply, 110/220VAC, 5V/2A, +-12V/.8A, USA plug, CE
Use one 312.8 per 3 add'l 100HC via 1 iNet-300/330/230
Use one 312.8 per 4 add'l 100/100B via 1 iNet-300/330/230 |
| #iNet-312.8eu |
Same as iNet-312.8, yet with 2 prong EURO plug, CE |
| #iNet-340 |
Din Rail Mounting Brackets for one iNet-100 Device |
| #iNet-34s |
34Pin Screw Terminal Panel (iNet-34W3F cable req'd)
Breaks out Digital I/O on iNet-200 Controller |
| #iNet-34W3F |
3ft 34wire Ribbon Cable
Connect iNet-34S to iNet-200 Controller Digital I/O |
| #iNet-350-Serial Number of Controller |
instruNet World PLUS (iW+) Software License for 1 Ctlr
One must include serial number of i2x0 controller card when ordering iNet-350.
instruNet World PLUS (iW+) software is not compatible with Macintosh |
|
|
