COMMUNICATION WITH AN INSTRUNET DEVICE
(e.g. i100) IS INTERMITTANT
TROUBLESHOOTING > i100 DEVICE >

* To identify if this is related to a buggy mechanical connection within wiring/cables: Run instruNet World, press the TEST tab at the bottom of the window, press the BIG TEST button to test continuously until you mouse down or an error is seen (in which case, an alert appears), and then pull / wiggle wires and connectors while looking for that alert. If poking at a specific place consistently produces an alert, you have a bad connection at that place.

* To identify if this is related to temperature (heat expands materials causing buggy connections to be Intermittent), blow heat or cold (e.g. hair dryer, heat gun, place in fridge for 20 minutes, cold spray), while running Big Test (described above) and looking for an alert.